Calibrum Plus

100% fully calibrated with composed core and is boiling waterproof. It gives consumers giving the precision required without any bend or warps and can be used with full confidence at places exposed to moisture. The matt process gives it extra smooth surface to find the best designs of laminates of your choice. This is IS 710 certified BWP grade plywood is the best for use in Luxury modular kitchen, high precision furniture, Wardrobe, Doors.

Thickness (MM)

16MM

Sizes (MM)

2440 MM X 1220 MM
2135 MM X 1220 MM

Borer & Termite Proof

Glue Line Protection

Boiling Waterproof

Matt Ply

Emission Level E-0

IS 710

Fully Calibrated

11 Years Warranty

SR NO.	Tests Method	ISI requirements	Observed Values
1	Dimension Squareness	Length: +6 mm Width: +3 mm Thickness : +/- 0.25 mm Max: 0.2%	Length- 2440 mm Width- 1221 mm Thickness- 16 mm mm Squareness - 0.13%
2	Moisture content	Moisture content should not be less than 5% and not more than 15%	8.8%
3	Glue Adhesion in a)Dry State b)Wet State	Minimum Individual: 1100 Avg.: 1350 N Minm Individual: 800 N Avg.: 1000 N	1422 N 1105 N
3	C)Adhesion of Plies	Bond shall show minimum Pass Standard, Poor or Excellent	Satisfactory
4	Glue Adhesion & Water Resistance Test (cyclic test followed by knife test: A cycle of 72 hrs. submerged at 100℃ +/-2℃)	72 hours boiling water single cycle	Satisfactory
5	Tensile Strength a)Parallel to the grain direction	Should not less then 42.0 N/mm²	56.12 N/mm²
	b)Prependicular to the grain direction	Should not less then 25.0 N/mm²	40.30 N/mm²
	c)Sum of both the direction	Should not be less then 84.5 N/mm²	96.42 N/mm²
6	Mycological Test a) Glue Shear Strength	Average 1000 N Minimum Individual: 800 N	Satisfactory
6	b) Adhesion of piles	Test price shall show no appreciation signs of separation at the edges of the vaneers	Satisfactory
7	Modulus of Elasticity a) Along the grains of the face Veener	Average: 7500 N/mm² Min. lndividual-6700 N/mm²	8070 N/mm² 7430 N/mm²
7	b) Across the grains of the face Veener	Average: 4000 N/mm² Min. lndividual-3600 N/mm²	4280 N/mm² 4170 N/mm²
8	Modulus of Rupture a) Along the grains of the face Veener	Average: 50 N/mm² Min. lndividual-45 N/mm²	56.3 N/mm² 47.9 N/mm²
8	b) Across the grains of the Face Veener	Average: 30 N/mm² Min. Individual-27	32.7 N/mm² 28.5 N/mm²