MarinaQuadro BWP

A marine-grade plywood complying with E0 emission norms, emitting negligible amounts of formaldehyde, making your interiors a safe space. Our VierPro technology with 4 steps of Hot and Cold pressing lends uniformity and is compressed to give extra strength. Being Marine BWP grade ply it is naturally immune to termite attacks, borer, and fungus . Backed by a solid 30-year warranty, MarinaQuadro is the most preferred plywood, and can be used for making best-in-class and long-enduring furniture, modular kitchen cabinets.

Thickness (MM)

6 MM, 8 MM, 12MM, 15 MM, 18MM, 25 MM

Sizes (MM)

2440 MM X 1220 MM
2135 MM X 1220 MM
1830 MM X 1220 MM

Borer & Termite Proof

Boiling Waterproof

Matt Ply

IS 710

Fully Calibrated

VierPro Technology

30 Years Warranty

E-0 Emission Level

PF - Glue Line Protection

Premium Gurjan Face

SR NO.	Tests Method	ISI Requirements	Observed Values
1	Dimension Squareness	Length :+ 6mm Width :+ 3mm Thicknes :+/- 5% Max : 0.20%	Length- 2442 mm Width- 1221 mm Thickness- 19 mm Squareness - 0.16%
2	Moisture content	Moisture content should not be less than 5% and not more than 15%	7.65%
3	Glue Adhesion in Dry State (a) Glue Shear Strength	Avg.: 1350 N Min. Individual: Avg.: 1100 N	1411 N 1176 N
3	(b) Adhesion of Plies	Bond shall show minimum Pass Standard, Poor or Excellent	Satisfactory
4	Water Resistance Test (After 72 Hours boiling in water) (a) Glue Shear Strength	Average : 1000 N Minimum Individual : 800 N	1249 N 915 N
4	(b) Adhesion of Plies	Bond shall show minimum Pass Standard, Poor or Excellent	Satisfactory
5	Tensile Strength (a) Along the grain direction	Should not be less than 42.0 N/mm²	54.20 N/mm²
	(b)Across the grain direction	Should not be less than 25.0 N/mm²	41.82 N/mm²
	(c) Sum of both the direction	Should not bf less than 84.5 N/mm²	96.02 N/mm²
6	Mycological Test (a) Glue Shear Strength	Average 1000 N Minimum lndividual : 800 N	1250 N 1010 N
6	(b) Adhesion of Plies	Adherent fibre distributed more or less uniformly	Excellent
7	STATIC BENDING STRENGTH ( DRY STATE )
	Modulus of Elasticity (a) Along the grains of the face Veneer	Average: 7500 N/mm² Min. lndividual-6700 N/mm²	7950 N/mm² 7270 N/mm²
	b) Across the grain of the Face Veneer	Average: 4000 N/mm² Min. lndividual-3600 N/mm²	4845 N/mm² 4115 N/mm²
	Modulus of Rupture (a) Along the grains of the face Veneer	Average: 50 N/mm² Min. lndividual-45 N/mm²	60 N/mm² 55 N/mm²
	(b) Across the grain of the Face Veneer	Average: 30 N/mm² Min. lndividual-27 N/mm²	36 N/mm² 29 N/mm²
8	STATIC BENDING STRENGTH ( WET STATE )
	Modulus of Elasticity (a) Along the grains of the face Veneer	Average: 3570 N/mm² Min. lndividual- 3400 N/mm²	4525 N/mm² 3770 N/mm²
	b) Across the grains of the Face Veener	Average: 2000 N/mm² Min. lndividual-1800 N/mm²	2845 N/mm² 2215 N/mm²
	Modulus of Rupture (a) Along the grains of the face Veneer	Average: 25 N/mm² Min. lndividual-22 N/mm²	30 N/mm² 25 N/mm²
	(b) Across the grains of the Face Veener	Average: 15 N/mm² Min. lndividual-13	21 N/mm² 15 N/mm²