MarinaQuadro Plus
Think of it as insurance for your luxury furniture. It comes with fully fire-retardant technology which can delay spreading of fire. Its E0 emission compliance, bacteria and fungi proof qualities make it one of the safest plywoods ever. Made with thicker face veneer, MQ Plus is additionally pressed for extra strength and precision. It comes with a 100% money-back guarantee, against manufacturing defects.
Sizes (Available in mm):
Application
-
Premium Villas
-
Highrise Buildings
-
Auditorium
-
Restaurants
Borer & Termite Resistance
Glue Line Protection
Boiling Waterproof
Matt Finish
E-0 Emission Level
100% Calibrated
VierPro Technology
Fully Fire Retardant
Smooth Surface Finish
100% Lifetime Warranty
Bacterial & Fungal Proof
IS 710/5509
| SL NO. | Tests Method | ISI requirements | Observed Values |
|---|---|---|---|
| 1 | Dimension Squareness | Length :+ 6mm Width :+ 3mm Thicknes : ± 5% Max : 2mm/1000mm |
Length- 2442 Width- 1221 Thickness- 19mm Squareness - 0.13 |
| 2 | Moisture content | Moisture content should not be less than 5% and not more than 15% | 8.3% |
| 3 | Glue Adhesion in Dry State (a) Glue Shear Strength |
Avg.: 1350 N Minm Individual: Avg.: 1100 N |
1401 N 1110 N |
| (b) Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent |
Satisfactory | |
| 4 | Water Resistance Test (a) Glue Shear Strength |
Average : 1000 N Minimum Individual : 800 N |
1099 N 1002 N |
| (b) Adhesion of Plies | Bond shall show minimum Pass Standard, Poor or Excellent |
Satisfactory | |
| 5 | Tensile Strength (a) Parallel to the grain direction |
Should not be less than 42.0 N/mm2 | 47.93 N/mm2 |
| (b)Prependicular to the grain direction | Should not be less than 25.0 N/mm2 | 36.7 N/mm2 | |
| (c) Sum of both the direction | Should not bf less than 84.5 N/mm2 | 84.63 N/mm2 | |
| 6 | Mycological Test (a) Glue Shear Strength |
Average 1000 N Minimum lndividual : 800 N |
1310 N 1370 N |
| (b) Adhesion of Plies | Test piece shall show no appreciation signs of separation at the edges of the Veneers |
No appreciation sign of separat on at the edges of the veneers |
|
| 7 | Modulus of Elasticity (a) Along the grains of the face Veneer |
Average: 7500 N/mm2 Min. lndividual-6700 N/mm2 |
7518 N/mm2 6907 N/mm2 |
| b) Across the grain of the Face Veneer | Average: 4000 N/mm2 Min. lndividual-3600 N/mm2 |
4012 N/mm2 3628 N/mm2 |
|
| 8 | Moduls of Rapture (a) Along the grains of the face Veneer |
Average: 50 N/mm2 Min. lndividual-45 N/mm2 |
54 N/mm2 46 N/mm2 |
| (b) Across the grain of the Face Veneer | Average: 30 N/mm2 Min. lndividual-27 N/mm2 |
36 N/mm2 30 N/mm2 |
|
| 9 | Horizootal Rate of Burning | The result of the test shall be considered satisfactory if taking the worst test results into account, the horizontal burning rate is not more than 100 mm / min or if the flame extinguishes before reaching the last measuring point |
Satisfactory |
| 10 | Vertical rate of burning | The result of the test described in Annex B shall be considered satisfactory if taking the worst test results into account the vertical burning rate is not more than 100 mm / min |
Satisfactory |
Download the brochure for more information